Characteristics of JPXC-1000 Relay
Like the current relay of JPXC-1000, because it belongs to the safety category, it can only operate in a specific direction to give full play to the characteristics of the product itself. If the direction of current flow is different from the specified direction, then the relay will not operate. Generally speaking, the number of winding turns of the coil in the relay can determine the action time after the power is turned on. After the coil is turned on, there is a time parameter until the contact is closed, but it is JPXC-1000 type. The relay does not have this time parameter and has to pass the actual test to draw a conclusion. It can be concluded with a rated voltage and a rising and falling time within the range.
In the current era of advanced information technology, this type of relay such as JPXC-1000 is often used as an intelligent module, which is used in the field of contact control equipment and current detection circuit fault conditions. In terms of intelligence first, there is a relay within a local area to realize the rapid judgment of the controlled circuit and line, as well as the misoperation of the relay. In this operating range, safety is always the first. Yes, the fault is found in the first time and the fault is resolved as quickly as possible. When the coils are connected in series, the time required is almost twice the time for the coils to pull in. When the use of the series is changed to a separate method, the action time can be reduced to at least half. Knowing the product can make better use of it.